|
|
|
|
|
|
|
|
|
|
Large exhibition awnings room
|
|
Guangzhou Jing sheng awning Co., LTD telephone 020-81594718 product selection
1, high-strength aluminum alloy extrusion profiles
S tensile strength 215 N/M square meters
S hardness 70HV
S: oxidation film thickness 10-12um, local film thickness not less than 8um
S service: aluminum alloy synthetic 10 years
2, high polyester fiber PVC film materials
S fiber high-intensity polyester 1100 Dtex
S weight NF EN ISO2286-2 standard 650 g/m2
S tensile strength (via/weft) NF EN ISO1421 standard 280/260 daN / 5cm
S tensile strength (via/weft) DIN 53.363 standard 28th / 25 daN
S the thickness of 0.16 mm
S light transmittance NFG 38.511 standard 13%
S applicable temperature - 300C / + 700C
S fire response DIN standard 4102 B1 level
Service life (normal use cases), Aluminum and steel components 10-15 years. awning
: perennial outdoor placed at least five years. The wind resistance: awnings room were closed and correct
Fixed wind resistance capacity is 7-8 class.
Awning materials: tarpaulin adopted pre-tension technology, tarpaulins, even if no stretching
Heavy rains don't cause awnings house top effusion. Tensile strength: 24/24 (via/weft
N / 5cm), tear strength: > 250 (N) flame retardancy: from the fire namely out
Aluminum alloy material: awnings room manufacturing from material to structure through strictly calculation, its
Safety performance by long-term verified by practice. Framework and high strength four two-tank hollow aluminum alloy
Materials. Aluminum alloy material surface high intensity silver oxidation (beautiful, wear-resisting
Loss). All steel parts are galvanized processing, with advanced senior welding technology processing molding
. Adjustable chassis base can be easily offset site schemes.
Additional remark: product selection 1, high-strength aluminum alloy s tensile strength 215
N/M square meters s hardness 70HV s oxidation film: thickness 10-12um, local film thickness
Not less than 8um s service: aluminum alloy synthetic 10 years 2, high polyester fiber PVC film
Material s fiber high-intensity polyester 1100 Dtex s weight NF EN ISO2286-2
Standard 650 g/m2 s tensile strength (via/weft) NF EN ISO1421 standards
280/260 daN / 5cm s tensile strength (via/weft 53.363 DIN standards.
28/25 daN s coating thickness of 0.16 mm s light transmittance NFG 38.511 standards
13% s applicable temperature - 300C / + 700C s fire response DIN 4102 standards
B1 level service life (normal use cases), Aluminum and steel components 10-15 years
. Awning: perennial outdoor placed at least five years. The wind resistance: awnings room all closed
A properly fixed wind resistance capacity is 7-8 class. Awning materials: retraction
Adopts the pre-tension technology, tarpaulins no stretching, even if rainstorm also won't be caused awnings room
Roof water. Tensile strength: 24/24 (via/weft N / 5cm), tear strength:
> 250 (N) flame retardancy: from the fire namely extinguish aluminum alloy material: awnings room manufacturing from material
To structure through strict calculations, the safety performance by long-term verified by practice. framework
And high strength four two-tank hollow aluminum alloy materials. Aluminum alloy material surface was too high
Strength the silver oxide (beautiful, wear resistance). All steel parts are galvanized processing, use
Advanced senior welding technology processing molding. Adjustable chassis base can be easily offset field
The schemes.
|
|
|
|
|
|
|
|
|
|
|
